HOSS – Heavy Object Structure Support lab table is the highest load capacity lab bench in the market. Supporting 2000lb SEFA rating. This means the welded lab table has a 1/4″ deflection whilst loaded with 2000lb. Further testing has proved this heavy-capacity lab bench can hold more than 5000lb. Have a piece of mind with the HOSS lab table that your heavy expensive equipment is safe.

• Adjustable telescoping legs in 1″ increments
• 24″ deep
• 2″ x 2″ steel legs
• SEFA 10, Category 3 – 2,000 pound capacity
• 4 legged welded construction
• Ships assembled

HOSS lab table can not only hold heavy laboratory equipment but acts as a Fume hood base table. Creating the ideal solution for a base for general purpose and ADA hoods, leaving lots of room underneath for other equipment and mobile storage.

• General fume hood table up to 6′
• Glide-only option for Fume Hoods
• Room below for cup sinks
• ADA compliant

• HANGING RAIL FOR SUSPENDED CABINET
  This hanging rail allows for the install of suspended cabinets.
• POWER BAR (20 AMP)
  Power bars available in dual or single circuit and can be located on the uprights. Dual circuit has two cords and two power switches. The Single circuit has one cord and one power switch. Both come with twist lock plug.
• POWER STRIP MOUNTING RAIL
  Power strip mounting rail allows for user supplied and installed power strip.
• Seismic Anchors

Kemresin® Epoxy Resin
Kemresin® is perfectly suited for use in the lab setting. With ultra-smooth non-porous surface appearance, composed of 1 inch thick molded epoxy resin, these tops come in four different colors. Colors include black, grey, putty and slate. With resistance to many acids, alkalies and solvents, this work top is also resistant to both heat and physical use. These Kemresin® tops can be used wherever the highest physical and chemical resistance properties are required.